Home » , » Firmware Haier G7 ID 100% Tested

Firmware Haier G7 ID 100% Tested

Download Firmware Haier G7 ID Then Extract In PC, Then Install USB Driver Haier G7 ID In PC Then Open and Run Flashtool.Firmware Haier G7 ID This You Can Use To Overcome Bootloop, Forgot Pattern / Password, Hank etc ...

Before Flash Haier G7 ID Better You Know That Flashing That Will Delete Existing Data In The Phone's Internal Memory, We Recommend Backing Up Data That You Consider Important, Data Backups Like Contact Photos, Video Dll ...

Flashing Haier G7 ID is a reinstall activity to restore the Haier G7 to factory default settings and repair system damage such as Stuck in Logo, Hank, Blank, Off ...

Firmware Haier G7 ID

  • Technology GSM / HSPA / LTE
  • Speed HSPA 42.2/11.5 Mbps, LTE Cat4 150/50 Mbps
  • GPRS Yes
  • EDGE Yes
  • 4G bands LTE band 1(2100), 3(1800), 7(2600), 20(800)
  • 3G bands HSDPA 900 / 2100
  • 2G bands GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
  • HSDPA 850 / 1900
  • LTE band 2(1900), 4(1700/2100), 5(850), 7(2600), 17(700)
  • LTE band 3(1800), 5(850), 40(2300)

File Name: Haier_G7_ID_MT6737M_20072017.zip
Size: 1.13 GB
How to Flash: Follow How To Flash

How to Flash Haier G7 ID Using SpFlashtool:
  1. Download Firmware Haier G7 ID, Then Extract On Your Computer / PC
  2. Next, Install USB Driver Haier G7 ID
  3. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Existing in Folder Result Extract
  4. Next Click Download in Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have Backup Original Firmware From Your Mobile Phone
  5. Then Prepare Phone In OFF Condition
  6. Next In Off Condition Connecting Phone to PC / Computer Using USB Cable, Make Sure Driver Installed On Computer For Device Detected With Flashtool
  7. Flashing / Re-Install Process In Progress, Wait Until The Reinstall / Flashing Process
  8. When finished it will appear notices Download OK In Flashtool In Green Box.
  9. Unplug Your Phone, Then Try Unlock, For Initial Boot Usually Older Because New In Flash So Naturally, Just Wait Until Booting Done.

Thanks for reading & sharing Gudang Firmware

Posted By Gudang Firmware
Gudang Firmware Updated at: March 02, 2018

0 komentar:

Post a Comment

Terimakasih Sudah Mengunjungi gudangfirmwere.com
Silahkan Berkomentar sesuai dengan Topik pembahasan