Firmware Winstar WS112 Tiger MT6580 100% Tested

Download Firmware Winstar WS112 Tiger MT6580 Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool. Firmware Winstar WS112 Tiger MT6580 This You Can Use To Overcome Bootloop, Forgot Pattern / Password, Hank etc ...

Before Flash Winstar WS112 Tiger Better You Know That Flashing That Will Delete Existing Data In The Phone's Internal Memory, We Recommend Backing Up Data That You Consider Important, Data Backups Like Contact Photos, Video Dll ...
Firmware Winstar WS112 Tiger MT6580 100% Tested

Flashing Winstar WS112 is a reinstall activity to restore the device to factory default settings and repair system damage such as Stuck in Logo, Hank, Blank, Off ...
File Name:
Size                 : 2 GB

    How to Flash Winstar WS112 Using SpFlashtool:
    1. Download Firmware Winstar WS112 Tiger MT6580, Then Extract On Your Computer / PC
    2. Next Install USB Driver Winstar WS112 Tiger MT6580
    3. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Existing in Folder Result Extract
    4. Next Click Download in Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have Backup Original Firmware From Your Winstar WS112 Tiger MT6580
    5. Then Prepare Phone In OFF Condition
    6. Next In Off Condition Connecting Phone to PC / Computer Using USB Cable, Make Sure Driver Installed On Computer For Device Detected With Flashtool
    7. Flashing / Re-Install Process In Progress, Wait Until The Reinstall / Flashing Process
    8. When finished it will appear notices Download OK In Flashtool In Green Box.
    9. Unplug Your Phone, Then Try Unlock, For Initial Boot Usually Older Because New In Flash So Naturally, Just Wait Until Booting Done.

    0 Response to "Firmware Winstar WS112 Tiger MT6580 100% Tested"

    Posting Komentar

    Terimakasih Sudah Mengunjungi
    Silahkan Berkomentar sesuai dengan Topik pembahasan