Firmware Bellphone BP 326 Neo [ TESTED ]
Download Firmware Bellphone BP 326 Neo Mobile Phone Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool. Firmware Bellphone BP 326 Neo This You Can Use To Overcome Bootloop, Forgot Pattern / Password, Hank, etc ...
File Name: Bellphone_BP_326_Neo_MT6580_W201_V25_13082018.zip
Size: 443.29 B
How To Flash: Follow Detailed Tutorial
DOWNLOAD
Kumpulan Firmware Berbagai Merek
Flashing Bellphone BP 326 Neo is a reinstall activity to restore the device to factory default settings and repair system damage such as Stuck in Logo, Hank, Blank, Off ...
Size: 443.29 B
How To Flash: Follow Detailed Tutorial
DOWNLOAD
How to Flash Bellphone BP 326 Neo Using Flashtool:
- Download Firmware Bellphone BP 326 Neo, Then Extract On Your Computer / PC
- Next Install USB Driver Bellphone BP 326 Neo
- Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Existing in Folder Result Extract
- Next Click Download in Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have Backup Original Firmware From Your Mobile Phone
- Then Prepare Phone In OFF Condition
- Next In Off Condition Connecting Phone to PC / Computer Using USB Cable, Make Sure Driver Installed On Computer For Device Detected With Flashtool
- Flashing / Re-Install Process In Progress, Wait Until The Reinstall / Flashing Process
- When finished it will appear notices Download OK In Flashtool In Green Box.
- Unplug Your Phone, Then Try Unlock, For Initial Boot Usually Older Because New In Flash So Naturally, Just Wait Until Booting Done.
0 Response to "Firmware Bellphone BP 326 Neo [ TESTED ]"
Posting Komentar
Terimakasih Sudah Mengunjungi gudangfirmwere.com
Silahkan Berkomentar sesuai dengan Topik pembahasan