Firmware Himax H3 PLUS 100% Tested

Download Firmware Himax H3 PLUS, Then Install USB Driver In PC Then Open and Run Flashtool. Firmware Himax H3 PLUS This You Can Use To Overcome Bootloop, Forgot Pattern / Password, Hank, etc ...

Before Flash Himax H3 PLUS Better, You Know That Flashing That Will Delete Existing Data In The Phone's Internal Memory, We Recommend Backing Up Data That You Consider Important, Data Backups Like Contact Photos, Video Dll ...
Firmware Himax H3 PLUS 100% Tested
Flashing Himax H3 PLUS is a reinstall activity to restore the device to factory default settings and repair system damage such as Stuck in Logo, Hank, Blank, Off ...




File Name: Himax_H3_Plus_MT6735_1.15_703_03072017.zip
Size: 1.21 GB
How To Flash: Follow Detailed Tutorial
DOWNLOAD



    How to Flash Himax H3 PLUS Using Flashtool:
    1. Download Firmware Himax H3 PLUS, Then Extract On Your Computer / PC
    2. Next, Install USB Driver Himax H3 PLUS
    3. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Existing in Folder Result Extract
    4. Next Click Download in Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have Backup Original Firmware From Your Mobile Phone
    5. Then Prepare Phone In OFF Condition
    6. Next In Off Condition Connecting Phone to PC / Computer Using USB Cable, Make Sure Driver Installed On Computer For Device Detected With Flashtool
    7. Flashing / Re-Install Process In Progress, Wait Until The Reinstall / Flashing Process
    8. When finished it will appear notices Download OK In Flashtool In Green Box.
    9. Unplug Your Phone, Then Try Unlock, For Initial Boot Usually Older Because New In Flash So Naturally, Just Wait Until Booting Done.

    0 Response to "Firmware Himax H3 PLUS 100% Tested"

    Post a Comment

    Terimakasih Sudah Mengunjungi gudangfirmwere.com
    Silahkan Berkomentar sesuai dengan Topik pembahasan