Firmware Coolpad NX1 Stock ROM Tested Free Download

Download Firmware Coolpad NX1 Mobile Phone Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool. Coolpad NX1 Firmware File ROM This You Can Use To Overcome Bootloop, Forgot Pattern / Password, Hank etc ...

Before Flash Coolpad NX1 Better, You Know That Flashing That Will Delete Existing Data In The Phone's Internal Memory, We Recommend Backing Up Data That You Consider Important, Data Backups Like Contact Photos, Video Dll ...

Flashing Coolpad NX1 is a reinstall activity to restore the device to factory default settings and repair system damage such as Stuck in Logo, Hank, Blank, Off ...

File Name: Coolpad_NX1_MT6735_29062017_5.1.zip
Size: 954 MB
DOWNLOAD

Kumpulan Firmware All Models Phones

How to Flash Coolpad NX1 Using SpFlashtool:

1. Download Firmware Coolpad NX1, Then Extract On Your Computer / PC
2. Next, Install USB Driver Coolpad NX1
3. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Existing in Folder Result Extract
4. Next Click Download in Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have Backup Original Firmware From Your Mobile Phone
5. Then Prepare Coolpad NX1 In OFF Condition
6. Next In Off Condition Connecting Phone to PC / Computer Using USB Cable, Make Sure Driver Installed On Computer For Device Detected With Flashtool
7. Flashing / Re-Install Process In Progress, Wait Until The Reinstall / Flashing Process
8. When finished it will appear notices Download OK In Flashtool In Green Box.
9. Unplug Your Phone, Then Try Unlock, For Initial Boot Usually Older Because New In Flash So Naturally, Just Wait Until Booting Done.

Kumpulan Firmware Berbagai Merek