Firmware File Stock ROM Haier G7 G552 Tested

Download Firmware Haier G7 G552 Then Extract In PC, Then Haier G7 G552 Install USB Driver In PC Then Open and Run Flashtool.Firmware This You Can Use To Overcome Bootloop, Forgot Pattern / Password, Hank etc ...
Firmware Haier G7 G552

Before Flash  Haier G7 G552 Better You Know That Flashing That Will Delete Existing Data In The Haier G7 G552 Internal Memory, We Recommend Backing Up Data That You Consider Important, Data Backups Like Contact Photos, Video Dll ...

Flashing  Haier G7 G552  is a reinstall activity to restore the device to factory default settings and repair Haier G7 G552 system damage such as Stuck in Logo, Hank, Blank, Off ...

File Name:
Size: 1.17 GB
How to Flash: Follow the How-To Flash

How to Flash Haier G7 G552 Using SpFlashtool:
  1. Download Firmware Haier G7 G552, Then Extract On Your Computer / PC
  2. Next Install Haier G7 G552 USB Driver
  3. Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Existing in Folder Result Extract
  4. Next Click Download in Flashtool, Make Sure All Unchecked Unless Preloader Should Not Be Dropped Unless You Have Backup Original Firmware From Your Mobile Phone
  5. Then Prepare Haier G7 G552 In OFF Condition
  6. Next In Off Condition Connecting Phone to PC / Computer Using USB Cable, Make Sure Driver Installed On Computer For Device Detected With Flashtool
  7. Flashing / Re-Install Process In Progress, Wait Until The Reinstall / Flashing Process
  8. When finished it will appear notices Download OK In Flashtool In Green Box.
  9. Unplug Your Phone, Then Try Unlock, For Initial Boot Usually Older Because New In Flash So Naturally, Just Wait Until Booting Done.
Kumpulan Firmware Berbagai Merek

0 Response to "Firmware File Stock ROM Haier G7 G552 Tested"

Posting Komentar

Terimakasih Sudah Mengunjungi
Silahkan Berkomentar sesuai dengan Topik pembahasan