Home » , » How To Flash On Infinix Zero 3 X552 100% OK

How To Flash On Infinix Zero 3 X552 100% OK

SP flash tool which is also known as Smart Phone flash tool is a cross-platform application. We use SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very user-friendly tool SP flash tool is used on Mediatek devices.This allows you to flash stock firmware on Mediatek smartphones and Tablets only.It will not support the devices having chipsets other than MediaTek


Preparation for Flashing Stock Firmware Infinix Zero 3 X552
  1. First Get Full Back up of your  Infinix Zero 3 X552
  2. Download and install Infinix Zero 3 X552 Driver on your pc.
  3. After that power off your  Infinix Zero 3 X552 and Remove the Battery (if it is Can removable).
  4. Then Download SmartPhone (SP) Flash Tool on your computer. Once downloaded, extract the SP flash Tool Zip file 
    Flashing On Infinix Zero 3 X552 Using SP-Flash tool
  5. Download and Extract the Stock ROM for your device according to its model number. A wrong stock ROM can damage your device. 
    Flashing On Infinix Zero 3 X552 Use SP-Flash tool
  6. Open Flash_tool.exe (you will find this from the extracted Sp Flash files), After that if any Warning pop-up appears on your screen click YES. 
  7. In the Download Tab, you should click on the scatter-loading button
    Flashing On Infinix Zero 3 X552
  8. After that Locate the scatter file (you will find the scatter file in the Stock ROM folder). now press on Download button just below the Download tab. 
    Flash On Infinix Zero 3 X552
  9. After that connect your device to your computer using a USB cable. Just press the volume buttons a couple of times so that computer detects your device.
  10. Then The flashing will begin automatically Once your device is recognized.
  11. Finally, when the process is completed a Green Ring will appear.
    Infinix Zero 3 X552

Phone automatically disconnecting during flashing

  • Try changing the USB-port
  • After that run SP FLASH TOOL.
  • Make sure you have the correct drivers installed (see here)
  • Finally try another PC and USB cable.

USB device not recognized
This is not related to Sp Flash tool. seems like this is error of your USB port.

  • Make sure your firmware is intended for your device. If yes, then try formatting before flash again to avoid any other issues.
Initialize scatter file failed. Please check the scatter file name you load is legal
  • Make sure the scatter file was not renamed previously. If you’re sure that the scatter file’s name was unaltered, then try using a higher version of SP FLASH TOOL
  • Make sure that the file(s) you’re trying to flash is actually for your exact phone model
  • After that ensure you tick the boxes for only the files present in the ROM you’re about to flash
  • You probably might have the wrong driver installed. Uninstall VCOM, PRELOADER and MTK drivers using USB then manually re-install.
4001 ERROR – S_FT_DA_NO_RESPONSE or Da didn’t send response data to FlashTool!
  • Try changing the USB-port
  • After that run SP FLASH TOOL as ADMIN.
  • After that make sure you have the correct drivers installed
  • After that Try using a higher version of SP FLASH TOOL.
  • After that try changing the USB cable and port or the PC itself.
  • Finally, use the format option first then download in SP FLASH TOOL.

Thanks for reading & sharing Gudang Firmware

Posted By Gudang Firmware
Gudang Firmware Updated at: March 04, 2018

0 komentar:

Post a Comment

Terimakasih Sudah Mengunjungi gudangfirmwere.com
Silahkan Berkomentar sesuai dengan Topik pembahasan